COWON
 

FIRMWARE

FIRMWARE    |     MANUAL    |     FAQ/QnA

Firmware/Software

PLENUE J Firmware V1.12

2020-04-20 13:02:09

Close

창닫기

Warning/Caution
  • The battery must be fully charged before firmware upgrade.
  • Do not reset PLENUE J during firmware upgrade.
  • Backup any important files in PLENUE J to your PC before firmware upgrade.
  • Please use firmware that COWON authorizes only.
  • JetEffect values might be initialized after firmware upgrade. Please record any important values.
New features
  • Fixed autoboot when power is connected.
Firmware Download
How to Install Firmware
  • After downloading the firmware file (PLENUEJ_1.12.zip), unzip it (PLENUE_J_FW.BIN, PLENUE_J_RS.BIN).
  • Turn on PLENUE J and connect it to a PC by a USB cable.
  • Copy and paste the two files (PLENUE_J_FW.BIN, PLENUE_J_RS.BIN) to the root folder of PLENUE J.
  • Right-click on the icon [Safely Remove Hardware] in the tray at the lower right corner of the screen to disconnect the device from the PC.
  • First of all, please make sure PLENUE J is turned off. Then, press a power button of the device. Firmware upgrade process will be shown on the screen followed by PLENUE J's automatic turning off. Please turn on the device again.
  • Firmware version is can be checked at settings > system > information.
NO SECTION MODEL SUBJECT DATE
Notice PLENUE PLENUE D3 PLENUE D3 Firmware V1.00 2021/03/29
Notice PLENUE PLENUE R2 PLENUE R2 Firmware V1.21 2020/05/27
Notice PLENUE PLENUE J PLENUE J Firmware V1.12 2020/04/20
Notice PLENUE PLENUE 2 PLENUE 2 Firmware V2.40 2020/02/10
Notice PLENUE PLENUE 2 Mark II PLENUE 2 Mark II Firmware V2.40 2020/02/10
Notice PLENUE PLENUE L PLENUE L Firmware V1.40 2020/02/04
Notice PLENUE PLENUE M2 PLENUE M2 Firmware V1.40 2020/01/06
Notice AutoCapsule AQ2 AutoCapsule Smart Manager V2.9.0 2019/11/07
LIST 검색 검색