COWON
 

FIRMWARE

FIRMWARE    |     MANUAL    |     FAQ/QnA

Firmware/Software

COWON D3 Pro Firmware V6.04

2014-12-05 16:18:41

Close

창닫기

COWON D3 Pro Firmware V6.04
Information
COWON D3 Pro firmware version 6.04 is for upgrading version of x.53/x.54/x.55.
If the version of the firmware installed on your device is lower than x.53 version,
please install the x.53 version first before upgrading to version 6.04.
Firmware version of your device can be checked at Settings > About D3 > Firmware version.
COWON D3 Firmware V x.53
Warning/Caution
Back up any important data before firmware upgrade.
Please pull out the MicroSD card that was inserted in D3 before firmware upgrade.
Please make sure the AC adapter is connected during firmware upgrade.
Do not turn off the device before firmware upgrade is completed.
Power shortage might cause damage on the device, and the damage will not be covered by warranty.
Adjusted D3 Pro GUI and JetEffect 5
Software and system optimization
NOTE 1: JetEffect is not activated during fast forwarding.
NOTE 2: D3 Pro firmware is focused on multimedia functions. Internet access will be limited under D3 Pro
firmware. To use the Internet, please download and install Vx.55 firmware.
NOTE 3: For stable operation, FAT32 format is recommended. NTFS format is for playing big size media files
that are over 4GB. Please be sure to use Safely Remove Hardware to protect file system before
disconnecting the cable from a PC after transferring data when using NTFS. For playing normal
media files, FAT32 is recommended.
COWON D3 Pro V6.04
Use the USB cable to connect COWON D3 to the PC.
Select Turn on USB storage to copy files between PC and D3.
Copy and paste the firmware file to the root folder of the device.
Click "Safely Remove Hardware" icon in the tray at the lower right corner of your computer screen to
disconnect the device from the PC.
Select Turn off USB storage and disconnect D3 from PC.
Connect AC adaptor with your device.
Settings > About D3 > System updates, select the storage where the file is saved to start
firmware upgrade.
Upon finishing firmware upgrade, verify the installed firmware version from Settings > About D3
> Firmware version.
Firmware upgrade can also be conducted through MicroSD cards by copying firmware files to the root
folder of MicroSD and inserting the MicroSD card into COWON D3.
NO SECTION MODEL SUBJECT DATE
Notice PLENUE PLENUE D3 PLENUE D3 Firmware V1.00 2021/03/29
Notice PLENUE PLENUE R2 PLENUE R2 Firmware V1.21 2020/05/27
Notice PLENUE PLENUE J PLENUE J Firmware V1.12 2020/04/20
Notice PLENUE PLENUE 2 PLENUE 2 Firmware V2.40 2020/02/10
Notice PLENUE PLENUE 2 Mark II PLENUE 2 Mark II Firmware V2.40 2020/02/10
Notice PLENUE PLENUE L PLENUE L Firmware V1.40 2020/02/04
Notice PLENUE PLENUE M2 PLENUE M2 Firmware V1.40 2020/01/06
Notice AutoCapsule AQ2 AutoCapsule Smart Manager V2.9.0 2019/11/07
LIST 검색 검색